a01nyub.cpp

Go to the documentation of this file.

// Datasheet https://wiki.dfrobot.com/A01NYUB%20Waterproof%20Ultrasonic%20Sensor%20SKU:%20SEN0313
 
#include "a01nyub.h"
#include "esphome/core/helpers.h"
#include "esphome/core/log.h"
 
namespace esphome {
namespace a01nyub {
 
static const char *const TAG = "a01nyub.sensor";
 
void A01nyubComponent::loop() {
  uint8_t data;
  while (this->available() > 0) {
    this->read_byte(&data);
    if (this->buffer_.empty() && (data != 0xff))
      continue;
    buffer_.push_back(data);
    if (this->buffer_.size() == 4)
      this->check_buffer_();
  }
}
 
void A01nyubComponent::check_buffer_() {
  uint8_t checksum = this->buffer_[0] + this->buffer_[1] + this->buffer_[2];
  if (this->buffer_[3] == checksum) {
    float distance = (this->buffer_[1] << 8) + this->buffer_[2];
    if (distance > 280) {
      float meters = distance / 1000.0;
      ESP_LOGV(TAG, "Distance from sensor: %f mm, %f m", distance, meters);
      this->publish_state(meters);
    } else {
      char hex_buf[format_hex_pretty_size(4)];
      ESP_LOGW(TAG, "Invalid data read from sensor: %s",
               format_hex_pretty_to(hex_buf, this->buffer_.data(), this->buffer_.size()));
    }
  } else {
    ESP_LOGW(TAG, "checksum failed: %02x != %02x", checksum, this->buffer_[3]);
  }
  this->buffer_.clear();
}
 
void A01nyubComponent::dump_config() { LOG_SENSOR("", "A01nyub Sensor", this); }
 
}  // namespace a01nyub
}  // namespace esphome