#include <airthings_wave_mini.h>

Inheritance diagram for esphome::airthings_wave_mini::AirthingsWaveMini:

Data Structures
struct	WaveMiniReadings

Public Member Functions
	AirthingsWaveMini ()

void	dump_config () override

Public Member Functions inherited from esphome::airthings_wave_base::AirthingsWaveBase
	AirthingsWaveBase ()=default

void	update () override

void	gattc_event_handler (esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) override

void	set_temperature (sensor::Sensor *temperature)

void	set_humidity (sensor::Sensor *humidity)

void	set_pressure (sensor::Sensor *pressure)

void	set_tvoc (sensor::Sensor *tvoc)

void	set_battery_voltage (sensor::Sensor *voltage)

void	set_battery_update_interval (uint32_t interval)

Public Member Functions inherited from esphome::PollingComponent
	PollingComponent ()

	PollingComponent (uint32_t update_interval)
	Initialize this polling component with the given update interval in ms.

virtual void	set_update_interval (uint32_t update_interval)
	Manually set the update interval in ms for this polling object.

void	call_setup () override

virtual uint32_t	get_update_interval () const
	Get the update interval in ms of this sensor.

void	start_poller ()

void	stop_poller ()

Public Member Functions inherited from esphome::Component
virtual void	setup ()
	Where the component's initialization should happen.

virtual void	loop ()
	This method will be called repeatedly.

virtual float	get_setup_priority () const
	priority of setup().

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop().

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

virtual void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const char *message)

void	disable_loop ()
	Disable this component's loop.

void	enable_loop ()
	Enable this component's loop.

void	enable_loop_soon_any_context ()
	Thread and ISR-safe version of enable_loop() that can be called from any context.

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message=nullptr)

void	status_set_warning (const LogString *message)

void	status_set_error (const char *message=nullptr)

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const LogString *source)
	Set where this component was loaded from for some debug messages.

const LogString *	get_component_log_str () const
	Get the integration where this component was declared as a LogString for logging.

bool	should_warn_of_blocking (uint32_t blocking_time)

Public Member Functions inherited from esphome::ble_client::BLEClientNode
virtual void	gap_event_handler (esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)

virtual void	loop ()

void	set_address (uint64_t address)

BLEClient *	parent ()

void	set_ble_client_parent (BLEClient *parent)

Protected Member Functions
void	read_sensors (uint8_t *raw_value, uint16_t value_len) override

Protected Member Functions inherited from esphome::airthings_wave_base::AirthingsWaveBase
bool	is_valid_voc_value_ (uint16_t voc)

bool	request_read_values_ ()

void	response_pending_ ()

void	response_received_ ()

void	set_response_timeout_ ()

bool	request_battery_ ()

void	read_battery_ (uint8_t *raw_value, uint16_t value_len)

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_dump_config ()

void	set_component_state_ (uint8_t state)
	Helper to set component state (clears state bits and sets new state)

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name.

void	set_interval (const char *name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a const char* name.

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function.

bool	cancel_interval (const char *name)

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name.

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function.

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name.

void	set_timeout (const char *name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a const char* name.

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function.

bool	cancel_timeout (const char *name)

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (const char *name, std::function< void()> &&f)
	Defer a callback to the next loop() call with a const char* name.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty.

Additional Inherited Members
Data Fields inherited from esphome::ble_client::BLEClientNode
espbt::ESPBTClient *	client

espbt::ClientState	node_state

Protected Attributes inherited from esphome::airthings_wave_base::AirthingsWaveBase
sensor::Sensor *	temperature_sensor_ {nullptr}

sensor::Sensor *	humidity_sensor_ {nullptr}

sensor::Sensor *	pressure_sensor_ {nullptr}

sensor::Sensor *	tvoc_sensor_ {nullptr}

sensor::Sensor *	battery_voltage_ {nullptr}

uint16_t	handle_

espbt::ESPBTUUID	service_uuid_

espbt::ESPBTUUID	sensors_data_characteristic_uuid_

uint16_t	acp_handle_ {0}

uint16_t	cccd_handle_ {0}

espbt::ESPBTUUID	access_control_point_characteristic_uuid_

uint8_t	responses_pending_ {0}

bool	read_battery_next_update_ {false}

uint32_t	battery_update_interval_ {}

Protected Attributes inherited from esphome::PollingComponent
uint32_t	update_interval_

Protected Attributes inherited from esphome::Component
const LogString *	component_source_ {nullptr}

uint16_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_MS}
	Warn if blocked for this many ms (max 65.5s)

uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-2: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED, 0x04=LOOP_DONE) Bit 3: STATUS_LED_WARNING Bit 4: STATUS_LED_ERROR Bits 5-7: Unused - reserved for future expansion.

volatile bool	pending_enable_loop_ {false}
	ISR-safe flag for enable_loop_soon_any_context.

Protected Attributes inherited from esphome::ble_client::BLEClientNode
BLEClient *	parent_

uint64_t	address_

Detailed Description

Definition at line 16 of file airthings_wave_mini.h.

Constructor & Destructor Documentation

◆ AirthingsWaveMini()

esphome::airthings_wave_mini::AirthingsWaveMini::AirthingsWaveMini ( )

Definition at line 45 of file airthings_wave_mini.cpp.

Member Function Documentation

◆ dump_config()

void esphome::airthings_wave_mini::AirthingsWaveMini::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 34 of file airthings_wave_mini.cpp.

◆ read_sensors()

void esphome::airthings_wave_mini::AirthingsWaveMini::read_sensors	(	uint8_t *	raw_value,
		uint16_t	value_len )

overrideprotectedvirtual

Implements esphome::airthings_wave_base::AirthingsWaveBase.

Definition at line 10 of file airthings_wave_mini.cpp.

The documentation for this class was generated from the following files:

esphome/components/airthings_wave_mini/airthings_wave_mini.h
esphome/components/airthings_wave_mini/airthings_wave_mini.cpp

Data Structures

Public Member Functions