#include <filter.h>

Inheritance diagram for esphome::binary_sensor::DelayedOnFilter:

Public Member Functions
optional< bool >	new_value (bool value, bool is_initial) override

float	get_setup_priority () const override

template<typename T >
void	set_delay (T delay)

Public Member Functions inherited from esphome::binary_sensor::Filter
void	input (bool value, bool is_initial)

void	output (bool value, bool is_initial)

Public Member Functions inherited from esphome::Component
virtual void	setup ()
	Where the component's initialization should happen.

virtual void	loop ()
	This method will be called repeatedly.

virtual void	dump_config ()

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop().

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

virtual void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const char *message)

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages.

const char *	get_component_source () const
	Get the integration where this component was declared as a string.

bool	should_warn_of_blocking (uint32_t blocking_time)

Protected Attributes
TemplatableValue< uint32_t >	delay_ {}

Protected Attributes inherited from esphome::binary_sensor::Filter
friend	BinarySensor

Filter *	next_ {nullptr}

BinarySensor *	parent_ {nullptr}

Deduplicator< bool >	dedup_

Protected Attributes inherited from esphome::Component
uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-1: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED) Bit 2: STATUS_LED_WARNING Bit 3: STATUS_LED_ERROR Bits 4-7: Unused - reserved for future expansion (50% of the bits are free)

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

uint16_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_MS}
	Warn if blocked for this many ms (max 65.5s)

std::string	error_message_ {}

Additional Inherited Members
Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name.

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function.

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name.

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function.

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name.

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function.

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty.

Detailed Description

Definition at line 45 of file filter.h.

Member Function Documentation

◆ get_setup_priority()

float esphome::binary_sensor::DelayedOnFilter::get_setup_priority ( ) const

overridevirtual

Reimplemented from esphome::Component.

Definition at line 50 of file filter.cpp.

◆ new_value()

optional< bool > esphome::binary_sensor::DelayedOnFilter::new_value	(	bool	value,
		bool	is_initial )

overridevirtual

Implements esphome::binary_sensor::Filter.

Definition at line 40 of file filter.cpp.

◆ set_delay()

template<typename T >

void esphome::binary_sensor::DelayedOnFilter::set_delay ( T delay )

inline

Definition at line 51 of file filter.h.

Field Documentation

◆ delay_

TemplatableValue<uint32_t> esphome::binary_sensor::DelayedOnFilter::delay_ {}

protected

Definition at line 54 of file filter.h.

The documentation for this class was generated from the following files:

esphome/components/binary_sensor/filter.h
esphome/components/binary_sensor/filter.cpp

Public Member Functions

Protected Attributes