#include <bme68x_bsec2.h>

Inheritance diagram for esphome::bme68x_bsec2::BME68xBSEC2Component:

Public Member Functions
void	setup () override

void	dump_config () override

void	loop () override

void	set_algorithm_output (AlgorithmOutput algorithm_output)

void	set_operating_age (OperatingAge operating_age)

void	set_temperature_offset (float offset)

void	set_voltage (Voltage voltage)

void	set_sample_rate (SampleRate sample_rate)

void	set_temperature_sample_rate (SampleRate sample_rate)

void	set_pressure_sample_rate (SampleRate sample_rate)

void	set_humidity_sample_rate (SampleRate sample_rate)

void	set_bsec2_configuration (const uint8_t *data, const uint32_t len)

void	set_state_save_interval (uint32_t interval)

void	set_temperature_sensor (sensor::Sensor *sensor)

void	set_pressure_sensor (sensor::Sensor *sensor)

void	set_humidity_sensor (sensor::Sensor *sensor)

void	set_gas_resistance_sensor (sensor::Sensor *sensor)

void	set_iaq_sensor (sensor::Sensor *sensor)

void	set_iaq_static_sensor (sensor::Sensor *sensor)

void	set_iaq_accuracy_sensor (sensor::Sensor *sensor)

void	set_co2_equivalent_sensor (sensor::Sensor *sensor)

void	set_breath_voc_equivalent_sensor (sensor::Sensor *sensor)

void	set_iaq_accuracy_text_sensor (text_sensor::TextSensor *sensor)

virtual uint32_t	get_hash ()=0

Public Member Functions inherited from esphome::Component
virtual float	get_setup_priority () const
	priority of setup().

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop().

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

bool	is_idle () const
	Check if this component is idle.

virtual void	mark_failed ()
	Mark this component as failed.

	ESPDEPRECATED ("Use mark_failed(LOG_STR(\"static string literal\")) instead. Do NOT use .c_str() from temporary " "strings. Will stop working in 2026.6.0", "2025.12.0") void mark_failed(const char *message)

void	mark_failed (const LogString *message)

void	disable_loop ()
	Disable this component's loop.

void	enable_loop ()
	Enable this component's loop.

void	enable_loop_soon_any_context ()
	Thread and ISR-safe version of enable_loop() that can be called from any context.

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message=nullptr)

void	status_set_warning (const LogString *message)

void	status_set_error ()

	ESPDEPRECATED ("Use status_set_error(LOG_STR(\"static string literal\")) instead. Do NOT use .c_str() from temporary " "strings. Will stop working in 2026.6.0", "2025.12.0") void status_set_error(const char *message)

void	status_set_error (const LogString *message)

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const char *name, uint32_t length=5000)
	Set warning status flag and automatically clear it after a timeout.

void	status_momentary_error (const char *name, uint32_t length=5000)
	Set error status flag and automatically clear it after a timeout.

bool	has_overridden_loop () const

void	set_component_source (const LogString *source)
	Set where this component was loaded from for some debug messages.

const LogString *	get_component_log_str () const
	Get the integration where this component was declared as a LogString for logging.

bool	should_warn_of_blocking (uint32_t blocking_time)

Protected Member Functions
void	set_config_ (const uint8_t *config, u_int32_t len)

float	calc_sensor_sample_rate_ (SampleRate sample_rate)

void	update_subscription_ ()

void	run_ ()

void	read_ (int64_t trigger_time_ns)

void	publish_ (const bsec_output_t *outputs, uint8_t num_outputs)

int64_t	get_time_ns_ ()

void	publish_sensor_ (sensor::Sensor *sensor, float value, bool change_only=false)

void	publish_sensor_ (text_sensor::TextSensor *sensor, const std::string &value)

void	load_state_ ()

void	save_state_ (uint8_t accuracy)

void	queue_push_ (std::function< void()> &&f)

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_component_state_ (uint8_t state)
	Helper to set component state (clears state bits and sets new state)

void	set_interval (uint32_t id, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a numeric ID (zero heap allocation).

void	set_interval (InternalSchedulerID id, uint32_t interval, std::function< void()> &&f)

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (uint32_t id)

bool	cancel_interval (InternalSchedulerID id)

ESPDEPRECATED("set_retry is deprecated and will be removed in 2026.8.0. Use set_timeout or set_interval instead.", "2026.2.0") void set_retry(const std	ESPDEPRECATED ("set_retry is deprecated and will be removed in 2026.8.0. Use set_timeout or set_interval instead.", "2026.2.0") void set_retry(const char *name

	ESPDEPRECATED ("set_retry is deprecated and will be removed in 2026.8.0. Use set_timeout or set_interval instead.", "2026.2.0") void set_retry(uint32_t id

	ESPDEPRECATED ("set_retry is deprecated and will be removed in 2026.8.0. Use set_timeout or set_interval instead.", "2026.2.0") void set_retry(uint32_t initial_wait_time

ESPDEPRECATED("cancel_retry is deprecated and will be removed in 2026.8.0.", "2026.2.0") bool cancel_retry(const std	ESPDEPRECATED ("cancel_retry is deprecated and will be removed in 2026.8.0.", "2026.2.0") bool cancel_retry(const char *name)

	ESPDEPRECATED ("cancel_retry is deprecated and will be removed in 2026.8.0.", "2026.2.0") bool cancel_retry(uint32_t id)

void	set_timeout (uint32_t id, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a numeric ID (zero heap allocation).

void	set_timeout (InternalSchedulerID id, uint32_t timeout, std::function< void()> &&f)

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (uint32_t id)

bool	cancel_timeout (InternalSchedulerID id)

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (uint32_t id, std::function< void()> &&f)
	Defer a callback with a numeric ID (zero heap allocation)

bool	cancel_defer (uint32_t id)

Protected Attributes
struct bme68x_dev	bme68x_

bsec_bme_settings_t	bsec_settings_

bsec_version_t	version_

uint8_t	bsec_instance_ [BSEC_INSTANCE_SIZE]

struct bme68x_heatr_conf	bme68x_heatr_conf_

uint8_t	op_mode_

bsec_library_return_t	bsec_status_ {BSEC_OK}

int8_t	bme68x_status_ {BME68X_OK}

int64_t	last_time_ms_ {0}

uint32_t	millis_overflow_counter_ {0}

std::queue< std::function< void()> >	queue_

uint8_t const *	bsec2_configuration_ {nullptr}

uint32_t	bsec2_configuration_length_ {0}

bool	bsec2_blob_configured_ {false}

ESPPreferenceObject	bsec_state_

uint32_t	state_save_interval_ms_ {21600000}

uint32_t	last_state_save_ms_ = 0

float	temperature_offset_ {0}

AlgorithmOutput	algorithm_output_ {ALGORITHM_OUTPUT_IAQ}

OperatingAge	operating_age_ {OPERATING_AGE_28D}

Voltage	voltage_ {VOLTAGE_3_3V}

SampleRate	sample_rate_ {SAMPLE_RATE_LP}

SampleRate	temperature_sample_rate_ {SAMPLE_RATE_DEFAULT}

SampleRate	pressure_sample_rate_ {SAMPLE_RATE_DEFAULT}

SampleRate	humidity_sample_rate_ {SAMPLE_RATE_DEFAULT}

sensor::Sensor *	temperature_sensor_ {nullptr}

sensor::Sensor *	pressure_sensor_ {nullptr}

sensor::Sensor *	humidity_sensor_ {nullptr}

sensor::Sensor *	gas_resistance_sensor_ {nullptr}

sensor::Sensor *	iaq_sensor_ {nullptr}

sensor::Sensor *	iaq_static_sensor_ {nullptr}

sensor::Sensor *	iaq_accuracy_sensor_ {nullptr}

sensor::Sensor *	co2_equivalent_sensor_ {nullptr}

sensor::Sensor *	breath_voc_equivalent_sensor_ {nullptr}

text_sensor::TextSensor *	iaq_accuracy_text_sensor_ {nullptr}

Protected Attributes inherited from esphome::Component
ESPDEPRECATED("Use const char* or uint32_t overload instead. Removed in 2026.7.0", "2026.1.0") void set_interval(const std voi	set_interval )(const char *name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name.

ESPDEPRECATED("Use const char* or uint32_t overload instead. Removed in 2026.7.0", "2026.1.0") bool cancel_interval(const std boo	cancel_interval )(const char *name)
	Cancel an interval function.

ESPDEPRECATED("set_retry is deprecated and will be removed in 2026.8.0. Use set_timeout or set_interval instead.", "2026.2.0") void set_retry(const std uint32_t	initial_wait_time

ESPDEPRECATED("set_retry is deprecated and will be removed in 2026.8.0. Use set_timeout or set_interval instead.", "2026.2.0") void set_retry(const std uint32_t uint8_t	max_attempts

ESPDEPRECATED("set_retry is deprecated and will be removed in 2026.8.0. Use set_timeout or set_interval instead.", "2026.2.0") void set_retry(const std uint32_t uint8_t std::function< RetryResult(uint8_t)> &&	f

ESPDEPRECATED("set_retry is deprecated and will be removed in 2026.8.0. Use set_timeout or set_interval instead.", "2026.2.0") void set_retry(const std uint32_t uint8_t std::function< RetryResult(uint8_t)> float	backoff_increase_factor = 1.0f)

uint32_t	initial_wait_time

uint32_t uint8_t	max_attempts

uint32_t uint8_t std::function< RetryResult(uint8_t)> &&	f

uint32_t uint8_t std::function< RetryResult(uint8_t)> float	backoff_increase_factor = 1.0f)

uint8_t	max_attempts

uint8_t std::function< RetryResult(uint8_t)> &&	f

uint8_t std::function< RetryResult(uint8_t)> float	backoff_increase_factor = 1.0f)

ESPDEPRECATED("Use const char* or uint32_t overload instead. Removed in 2026.7.0", "2026.1.0") void set_timeout(const std voi	set_timeout )(const char *name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name.

ESPDEPRECATED("Use const char* or uint32_t overload instead. Removed in 2026.7.0", "2026.1.0") bool cancel_timeout(const std boo	cancel_timeout )(const char *name)
	Cancel a timeout function.

ESPDEPRECATED("Use const char* overload instead. Removed in 2026.7.0", "2026.1.0") void defer(const std voi	defer )(const char *name, std::function< void()> &&f)
	Defer a callback to the next loop() call.

ESPDEPRECATED("Use const char* overload instead. Removed in 2026.7.0", "2026.1.0") bool cancel_defer(const std boo	cancel_defer )(const char *name)
	Cancel a defer callback using the specified name, name must not be empty.

const LogString *	component_source_ {nullptr}

uint16_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_MS}
	Warn if blocked for this many ms (max 65.5s)

uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-2: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED, 0x04=LOOP_DONE) Bit 3: STATUS_LED_WARNING Bit 4: STATUS_LED_ERROR Bits 5-7: Unused - reserved for future expansion.

volatile bool	pending_enable_loop_ {false}
	ISR-safe flag for enable_loop_soon_any_context.

Detailed Description

Definition at line 47 of file bme68x_bsec2.h.

Member Function Documentation

◆ calc_sensor_sample_rate_()

float esphome::bme68x_bsec2::BME68xBSEC2Component::calc_sensor_sample_rate_ ( SampleRate sample_rate )

protected

Definition at line 144 of file bme68x_bsec2.cpp.

◆ dump_config()

void esphome::bme68x_bsec2::BME68xBSEC2Component::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 58 of file bme68x_bsec2.cpp.

◆ get_hash()

virtual uint32_t esphome::bme68x_bsec2::BME68xBSEC2Component::get_hash ( )

pure virtual

◆ get_time_ns_()

int64_t esphome::bme68x_bsec2::BME68xBSEC2Component::get_time_ns_ ( )

protected

Definition at line 455 of file bme68x_bsec2.cpp.

◆ load_state_()

void esphome::bme68x_bsec2::BME68xBSEC2Component::load_state_ ( )

protected

Definition at line 483 of file bme68x_bsec2.cpp.

◆ loop()

void esphome::bme68x_bsec2::BME68xBSEC2Component::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 109 of file bme68x_bsec2.cpp.

◆ publish_()

void esphome::bme68x_bsec2::BME68xBSEC2Component::publish_	(	const bsec_output_t *	outputs,
		uint8_t	num_outputs )

protected

Definition at line 387 of file bme68x_bsec2.cpp.

◆ publish_sensor_() [1/2]

void esphome::bme68x_bsec2::BME68xBSEC2Component::publish_sensor_	(	sensor::Sensor *	sensor,
		float	value,
		bool	change_only = false )

protected

Definition at line 466 of file bme68x_bsec2.cpp.

◆ publish_sensor_() [2/2]

void esphome::bme68x_bsec2::BME68xBSEC2Component::publish_sensor_	(	text_sensor::TextSensor *	sensor,
		const std::string &	value )

protected

Definition at line 475 of file bme68x_bsec2.cpp.

◆ queue_push_()

void esphome::bme68x_bsec2::BME68xBSEC2Component::queue_push_ ( std::function< void()> && f )

inlineprotected

Definition at line 106 of file bme68x_bsec2.h.

◆ read_()

void esphome::bme68x_bsec2::BME68xBSEC2Component::read_ ( int64_t trigger_time_ns )

protected

Definition at line 289 of file bme68x_bsec2.cpp.

◆ run_()

void esphome::bme68x_bsec2::BME68xBSEC2Component::run_ ( )

protected

Definition at line 209 of file bme68x_bsec2.cpp.

◆ save_state_()

void esphome::bme68x_bsec2::BME68xBSEC2Component::save_state_ ( uint8_t accuracy )

protected

Definition at line 500 of file bme68x_bsec2.cpp.

◆ set_algorithm_output()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_algorithm_output ( AlgorithmOutput algorithm_output )

inline

Definition at line 53 of file bme68x_bsec2.h.

◆ set_breath_voc_equivalent_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_breath_voc_equivalent_sensor ( sensor::Sensor * sensor )

inline

Definition at line 79 of file bme68x_bsec2.h.

◆ set_bsec2_configuration()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_bsec2_configuration	(	const uint8_t *	data,
		const uint32_t	len )

inline

Definition at line 63 of file bme68x_bsec2.h.

◆ set_co2_equivalent_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_co2_equivalent_sensor ( sensor::Sensor * sensor )

inline

Definition at line 78 of file bme68x_bsec2.h.

◆ set_config_()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_config_	(	const uint8_t *	config,
		u_int32_t	len )

protected

Definition at line 131 of file bme68x_bsec2.cpp.

◆ set_gas_resistance_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_gas_resistance_sensor ( sensor::Sensor * sensor )

inline

Definition at line 74 of file bme68x_bsec2.h.

◆ set_humidity_sample_rate()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_humidity_sample_rate ( SampleRate sample_rate )

inline

Definition at line 61 of file bme68x_bsec2.h.

◆ set_humidity_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_humidity_sensor ( sensor::Sensor * sensor )

inline

Definition at line 73 of file bme68x_bsec2.h.

◆ set_iaq_accuracy_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_iaq_accuracy_sensor ( sensor::Sensor * sensor )

inline

Definition at line 77 of file bme68x_bsec2.h.

◆ set_iaq_accuracy_text_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_iaq_accuracy_text_sensor ( text_sensor::TextSensor * sensor )

inline

Definition at line 82 of file bme68x_bsec2.h.

◆ set_iaq_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_iaq_sensor ( sensor::Sensor * sensor )

inline

Definition at line 75 of file bme68x_bsec2.h.

◆ set_iaq_static_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_iaq_static_sensor ( sensor::Sensor * sensor )

inline

Definition at line 76 of file bme68x_bsec2.h.

◆ set_operating_age()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_operating_age ( OperatingAge operating_age )

inline

Definition at line 54 of file bme68x_bsec2.h.

◆ set_pressure_sample_rate()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_pressure_sample_rate ( SampleRate sample_rate )

inline

Definition at line 60 of file bme68x_bsec2.h.

◆ set_pressure_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_pressure_sensor ( sensor::Sensor * sensor )

inline

Definition at line 72 of file bme68x_bsec2.h.

◆ set_sample_rate()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_sample_rate ( SampleRate sample_rate )

inline

Definition at line 58 of file bme68x_bsec2.h.

◆ set_state_save_interval()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_state_save_interval ( uint32_t interval )

inline

Definition at line 68 of file bme68x_bsec2.h.

◆ set_temperature_offset()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_temperature_offset ( float offset )

inline

Definition at line 55 of file bme68x_bsec2.h.

◆ set_temperature_sample_rate()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_temperature_sample_rate ( SampleRate sample_rate )

inline

Definition at line 59 of file bme68x_bsec2.h.

◆ set_temperature_sensor()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_temperature_sensor ( sensor::Sensor * sensor )

inline

Definition at line 71 of file bme68x_bsec2.h.

◆ set_voltage()

void esphome::bme68x_bsec2::BME68xBSEC2Component::set_voltage ( Voltage voltage )

inline

Definition at line 56 of file bme68x_bsec2.h.

◆ setup()

void esphome::bme68x_bsec2::BME68xBSEC2Component::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 23 of file bme68x_bsec2.cpp.

◆ update_subscription_()

void esphome::bme68x_bsec2::BME68xBSEC2Component::update_subscription_ ( )

protected

Definition at line 151 of file bme68x_bsec2.cpp.

Field Documentation

◆ algorithm_output_

AlgorithmOutput esphome::bme68x_bsec2::BME68xBSEC2Component::algorithm_output_ {ALGORITHM_OUTPUT_IAQ}

protected

Definition at line 133 of file bme68x_bsec2.h.

◆ bme68x_

struct bme68x_dev esphome::bme68x_bsec2::BME68xBSEC2Component::bme68x_

protected

Definition at line 108 of file bme68x_bsec2.h.

◆ bme68x_heatr_conf_

struct bme68x_heatr_conf esphome::bme68x_bsec2::BME68xBSEC2Component::bme68x_heatr_conf_

protected

Definition at line 113 of file bme68x_bsec2.h.

◆ bme68x_status_

int8_t esphome::bme68x_bsec2::BME68xBSEC2Component::bme68x_status_ {BME68X_OK}

protected

Definition at line 116 of file bme68x_bsec2.h.

◆ breath_voc_equivalent_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::breath_voc_equivalent_sensor_ {nullptr}

protected

Definition at line 151 of file bme68x_bsec2.h.

◆ bsec2_blob_configured_

bool esphome::bme68x_bsec2::BME68xBSEC2Component::bsec2_blob_configured_ {false}

protected

Definition at line 125 of file bme68x_bsec2.h.

◆ bsec2_configuration_

uint8_t const* esphome::bme68x_bsec2::BME68xBSEC2Component::bsec2_configuration_ {nullptr}

protected

Definition at line 123 of file bme68x_bsec2.h.

◆ bsec2_configuration_length_

uint32_t esphome::bme68x_bsec2::BME68xBSEC2Component::bsec2_configuration_length_ {0}

protected

Definition at line 124 of file bme68x_bsec2.h.

◆ bsec_instance_

uint8_t esphome::bme68x_bsec2::BME68xBSEC2Component::bsec_instance_[BSEC_INSTANCE_SIZE]

protected

Definition at line 111 of file bme68x_bsec2.h.

◆ bsec_settings_

bsec_bme_settings_t esphome::bme68x_bsec2::BME68xBSEC2Component::bsec_settings_

protected

Definition at line 109 of file bme68x_bsec2.h.

◆ bsec_state_

ESPPreferenceObject esphome::bme68x_bsec2::BME68xBSEC2Component::bsec_state_

protected

Definition at line 127 of file bme68x_bsec2.h.

◆ bsec_status_

bsec_library_return_t esphome::bme68x_bsec2::BME68xBSEC2Component::bsec_status_ {BSEC_OK}

protected

Definition at line 115 of file bme68x_bsec2.h.

◆ co2_equivalent_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::co2_equivalent_sensor_ {nullptr}

protected

Definition at line 150 of file bme68x_bsec2.h.

◆ gas_resistance_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::gas_resistance_sensor_ {nullptr}

protected

Definition at line 146 of file bme68x_bsec2.h.

◆ humidity_sample_rate_

SampleRate esphome::bme68x_bsec2::BME68xBSEC2Component::humidity_sample_rate_ {SAMPLE_RATE_DEFAULT}

protected

Definition at line 140 of file bme68x_bsec2.h.

◆ humidity_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::humidity_sensor_ {nullptr}

protected

Definition at line 145 of file bme68x_bsec2.h.

◆ iaq_accuracy_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::iaq_accuracy_sensor_ {nullptr}

protected

Definition at line 149 of file bme68x_bsec2.h.

◆ iaq_accuracy_text_sensor_

text_sensor::TextSensor* esphome::bme68x_bsec2::BME68xBSEC2Component::iaq_accuracy_text_sensor_ {nullptr}

protected

Definition at line 154 of file bme68x_bsec2.h.

◆ iaq_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::iaq_sensor_ {nullptr}

protected

Definition at line 147 of file bme68x_bsec2.h.

◆ iaq_static_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::iaq_static_sensor_ {nullptr}

protected

Definition at line 148 of file bme68x_bsec2.h.

◆ last_state_save_ms_

uint32_t esphome::bme68x_bsec2::BME68xBSEC2Component::last_state_save_ms_ = 0

protected

Definition at line 129 of file bme68x_bsec2.h.

◆ last_time_ms_

int64_t esphome::bme68x_bsec2::BME68xBSEC2Component::last_time_ms_ {0}

protected

Definition at line 118 of file bme68x_bsec2.h.

◆ millis_overflow_counter_

uint32_t esphome::bme68x_bsec2::BME68xBSEC2Component::millis_overflow_counter_ {0}

protected

Definition at line 119 of file bme68x_bsec2.h.

◆ op_mode_

uint8_t esphome::bme68x_bsec2::BME68xBSEC2Component::op_mode_

protected

Definition at line 114 of file bme68x_bsec2.h.

◆ operating_age_

OperatingAge esphome::bme68x_bsec2::BME68xBSEC2Component::operating_age_ {OPERATING_AGE_28D}

protected

Definition at line 134 of file bme68x_bsec2.h.

◆ pressure_sample_rate_

SampleRate esphome::bme68x_bsec2::BME68xBSEC2Component::pressure_sample_rate_ {SAMPLE_RATE_DEFAULT}

protected

Definition at line 139 of file bme68x_bsec2.h.

◆ pressure_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::pressure_sensor_ {nullptr}

protected

Definition at line 144 of file bme68x_bsec2.h.

◆ queue_

std::queue<std::function<void()> > esphome::bme68x_bsec2::BME68xBSEC2Component::queue_

protected

Definition at line 121 of file bme68x_bsec2.h.

◆ sample_rate_

SampleRate esphome::bme68x_bsec2::BME68xBSEC2Component::sample_rate_ {SAMPLE_RATE_LP}

protected

Definition at line 137 of file bme68x_bsec2.h.

◆ state_save_interval_ms_

uint32_t esphome::bme68x_bsec2::BME68xBSEC2Component::state_save_interval_ms_ {21600000}

protected

Definition at line 128 of file bme68x_bsec2.h.

◆ temperature_offset_

float esphome::bme68x_bsec2::BME68xBSEC2Component::temperature_offset_ {0}

protected

Definition at line 131 of file bme68x_bsec2.h.

◆ temperature_sample_rate_

SampleRate esphome::bme68x_bsec2::BME68xBSEC2Component::temperature_sample_rate_ {SAMPLE_RATE_DEFAULT}

protected

Definition at line 138 of file bme68x_bsec2.h.

◆ temperature_sensor_

sensor::Sensor* esphome::bme68x_bsec2::BME68xBSEC2Component::temperature_sensor_ {nullptr}

protected

Definition at line 143 of file bme68x_bsec2.h.

◆ version_

bsec_version_t esphome::bme68x_bsec2::BME68xBSEC2Component::version_

protected

Definition at line 110 of file bme68x_bsec2.h.

◆ voltage_

Voltage esphome::bme68x_bsec2::BME68xBSEC2Component::voltage_ {VOLTAGE_3_3V}

protected

Definition at line 135 of file bme68x_bsec2.h.

The documentation for this class was generated from the following files:

esphome/components/bme68x_bsec2/bme68x_bsec2.h
esphome/components/bme68x_bsec2/bme68x_bsec2.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Detailed Description

Member Function Documentation

◆ calc_sensor_sample_rate_()

◆ dump_config()

◆ get_hash()

◆ get_time_ns_()

◆ load_state_()

◆ loop()

◆ publish_()

◆ publish_sensor_() [1/2]

◆ publish_sensor_() [2/2]

◆ queue_push_()

◆ read_()

◆ run_()

◆ save_state_()

◆ set_algorithm_output()

◆ set_breath_voc_equivalent_sensor()

◆ set_bsec2_configuration()

◆ set_co2_equivalent_sensor()

◆ set_config_()

◆ set_gas_resistance_sensor()

◆ set_humidity_sample_rate()

◆ set_humidity_sensor()

◆ set_iaq_accuracy_sensor()

◆ set_iaq_accuracy_text_sensor()

◆ set_iaq_sensor()

◆ set_iaq_static_sensor()

◆ set_operating_age()

◆ set_pressure_sample_rate()

◆ set_pressure_sensor()

◆ set_sample_rate()

◆ set_state_save_interval()

◆ set_temperature_offset()

◆ set_temperature_sample_rate()

◆ set_temperature_sensor()

◆ set_voltage()

◆ setup()

◆ update_subscription_()

Field Documentation

◆ algorithm_output_

◆ bme68x_

◆ bme68x_heatr_conf_

◆ bme68x_status_

◆ breath_voc_equivalent_sensor_

◆ bsec2_blob_configured_

◆ bsec2_configuration_

◆ bsec2_configuration_length_

◆ bsec_instance_

◆ bsec_settings_

◆ bsec_state_

◆ bsec_status_

◆ co2_equivalent_sensor_

◆ gas_resistance_sensor_

◆ humidity_sample_rate_

◆ humidity_sensor_

◆ iaq_accuracy_sensor_

◆ iaq_accuracy_text_sensor_

◆ iaq_sensor_

◆ iaq_static_sensor_

◆ last_state_save_ms_

◆ last_time_ms_

◆ millis_overflow_counter_

◆ op_mode_

◆ operating_age_

◆ pressure_sample_rate_

◆ pressure_sensor_

◆ queue_

◆ sample_rate_

◆ state_save_interval_ms_

◆ temperature_offset_

◆ temperature_sample_rate_

◆ temperature_sensor_

◆ version_

◆ voltage_