#include <ens160_spi.h>

Inheritance diagram for esphome::ens160_spi::ENS160SPIComponent:

Additional Inherited Members
Public Member Functions inherited from esphome::ens160_base::ENS160Component
void	set_co2 (sensor::Sensor *co2)

void	set_tvoc (sensor::Sensor *tvoc)

void	set_aqi (sensor::Sensor *aqi)

void	set_humidity (sensor::Sensor *humidity)

void	set_temperature (sensor::Sensor *temperature)

void	update () override

Public Member Functions inherited from esphome::PollingComponent
	PollingComponent ()

	PollingComponent (uint32_t update_interval)
	Initialize this polling component with the given update interval in ms.

virtual void	set_update_interval (uint32_t update_interval)
	Manually set the update interval in ms for this polling object.

void	call_setup () override

virtual uint32_t	get_update_interval () const
	Get the update interval in ms of this sensor.

void	start_poller ()

void	stop_poller ()

Public Member Functions inherited from esphome::Component
virtual void	loop ()
	This method will be called repeatedly.

virtual float	get_setup_priority () const
	priority of setup().

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop().

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

virtual void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const char *message)

void	disable_loop ()
	Disable this component's loop.

void	enable_loop ()
	Enable this component's loop.

void	enable_loop_soon_any_context ()
	Thread and ISR-safe version of enable_loop() that can be called from any context.

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message=nullptr)

void	status_set_warning (const LogString *message)

void	status_set_error (const char *message=nullptr)

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const LogString *source)
	Set where this component was loaded from for some debug messages.

const LogString *	get_component_log_str () const
	Get the integration where this component was declared as a LogString for logging.

bool	should_warn_of_blocking (uint32_t blocking_time)

Public Member Functions inherited from esphome::sensor::Sensor
	Sensor ()

int8_t	get_accuracy_decimals ()
	Get the accuracy in decimals, using the manual override if set.

void	set_accuracy_decimals (int8_t accuracy_decimals)
	Manually set the accuracy in decimals.

StateClass	get_state_class ()
	Get the state class, using the manual override if set.

void	set_state_class (StateClass state_class)
	Manually set the state class.

bool	get_force_update () const
	Get whether force update mode is enabled.

void	set_force_update (bool force_update)
	Set force update mode.

void	add_filter (Filter *filter)
	Add a filter to the filter chain. Will be appended to the back.

void	add_filters (const std::vector< Filter * > &filters)
	Add a list of vectors to the back of the filter chain.

void	set_filters (const std::vector< Filter * > &filters)
	Clear the filters and replace them by filters.

void	clear_filters ()
	Clear the entire filter chain.

float	get_state () const
	Getter-syntax for .state.

float	get_raw_state () const
	Getter-syntax for .raw_state.

void	publish_state (float state)
	Publish a new state to the front-end.

void	add_on_state_callback (std::function< void(float)> &&callback)
	Add a callback that will be called every time a filtered value arrives.

void	add_on_raw_state_callback (std::function< void(float)> &&callback)
	Add a callback that will be called every time the sensor sends a raw value.

void	internal_send_state_to_frontend (float state)

Public Member Functions inherited from esphome::EntityBase
const StringRef &	get_name () const

void	set_name (const char *name)

bool	has_own_name () const

std::string	get_object_id () const

void	set_object_id (const char *object_id)

uint32_t	get_object_id_hash ()

bool	is_internal () const

void	set_internal (bool internal)

bool	is_disabled_by_default () const

void	set_disabled_by_default (bool disabled_by_default)

EntityCategory	get_entity_category () const

void	set_entity_category (EntityCategory entity_category)

std::string	get_icon () const

void	set_icon (const char *icon)

StringRef	get_icon_ref () const

uint32_t	get_device_id () const

void	set_device (Device *device)

bool	has_state () const

void	set_has_state (bool state)

uint32_t	get_preference_hash ()
	Get a unique hash for storing preferences/settings for this entity.

Public Member Functions inherited from esphome::EntityBase_DeviceClass
std::string	get_device_class ()
	Get the device class, using the manual override if set.

void	set_device_class (const char *device_class)
	Manually set the device class.

StringRef	get_device_class_ref () const
	Get the device class as StringRef.

Public Member Functions inherited from esphome::EntityBase_UnitOfMeasurement
std::string	get_unit_of_measurement ()
	Get the unit of measurement, using the manual override if set.

void	set_unit_of_measurement (const char *unit_of_measurement)
	Manually set the unit of measurement.

StringRef	get_unit_of_measurement_ref () const
	Get the unit of measurement as StringRef.

Public Member Functions inherited from esphome::spi::SPIDevice< spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_200KHZ >
	SPIDevice ()

	SPIDevice (SPIComponent parent, GPIOPin cs_pin)

void	spi_setup () override

void	spi_teardown () override

void	set_spi_parent (SPIComponent *parent)

void	set_cs_pin (GPIOPin *cs)

void	set_data_rate (uint32_t data_rate)

void	set_bit_order (SPIBitOrder order)

void	set_mode (SPIMode mode)

uint8_t	read_byte ()

void	read_array (uint8_t *data, size_t length)

void	write (uint16_t data, size_t num_bits)
	Write a single data item, up to 32 bits.

void	write_cmd_addr_data (size_t cmd_bits, uint32_t cmd, size_t addr_bits, uint32_t address, const uint8_t *data, size_t length, uint8_t bus_width=1)

void	write_byte (uint8_t data)

void	transfer_array (uint8_t *data, size_t length)
	Write the array data, replace with received data.

void	transfer_array (std::array< uint8_t, N > &data)

uint8_t	transfer_byte (uint8_t data)

void	write_byte16 (uint16_t data)
	Write 16 bit data.

void	write_array16 (const uint16_t *data, size_t length)
	Write an array of data as 16 bit values, byte-swapping if required.

void	enable ()

void	disable ()

void	write_array (const uint8_t *data, size_t length)

void	write_array (const std::array< uint8_t, N > &data)

void	write_array (const std::vector< uint8_t > &data)

Public Member Functions inherited from esphome::spi::SPIClient
	SPIClient (SPIBitOrder bit_order, SPIMode mode, uint32_t data_rate)

bool	spi_is_ready ()

void	set_release_device (bool release)

void	set_write_only (bool write_only)

Data Fields inherited from esphome::sensor::Sensor
float	state
	This member variable stores the last state that has passed through all filters.

float	raw_state
	This member variable stores the current raw state of the sensor, without any filters applied.

Protected Types inherited from esphome::ens160_base::ENS160Component
enum	ErrorCode { NONE = 0 , COMMUNICATION_FAILED , INVALID_ID , VALIDITY_INVALID , READ_FAILED , WRITE_FAILED , STD_OPMODE_FAILED }

enum	ValidityFlag { NORMAL_OPERATION = 0 , WARMING_UP , INITIAL_STARTUP , INVALID_OUTPUT }

Protected Member Functions inherited from esphome::ens160_base::ENS160Component
void	send_env_data_ ()

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_dump_config ()

void	set_component_state_ (uint8_t state)
	Helper to set component state (clears state bits and sets new state)

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name.

void	set_interval (const char *name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a const char* name.

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function.

bool	cancel_interval (const char *name)

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name.

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function.

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name.

void	set_timeout (const char *name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a const char* name.

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function.

bool	cancel_timeout (const char *name)

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (const char *name, std::function< void()> &&f)
	Defer a callback to the next loop() call with a const char* name.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty.

Protected Member Functions inherited from esphome::EntityBase
StringRef	get_object_id_ref_for_api_ () const

virtual uint32_t	hash_base ()
	The hash_base() function has been deprecated.

void	calc_object_id_ ()

bool	is_object_id_dynamic_ () const
	Check if the object_id is dynamic (changes with MAC suffix)

Protected Attributes inherited from esphome::ens160_base::ENS160Component
enum esphome::ens160_base::ENS160Component::ErrorCode	NONE

enum esphome::ens160_base::ENS160Component::ValidityFlag	validity_flag_

bool	warming_up_ {false}

bool	initial_startup_ {false}

uint8_t	firmware_ver_major_ {0}

uint8_t	firmware_ver_minor_ {0}

uint8_t	firmware_ver_build_ {0}

sensor::Sensor *	co2_ {nullptr}

sensor::Sensor *	tvoc_ {nullptr}

sensor::Sensor *	aqi_ {nullptr}

sensor::Sensor *	humidity_ {nullptr}

sensor::Sensor *	temperature_ {nullptr}

Protected Attributes inherited from esphome::PollingComponent
uint32_t	update_interval_

Protected Attributes inherited from esphome::Component
const LogString *	component_source_ {nullptr}

uint16_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_MS}
	Warn if blocked for this many ms (max 65.5s)

uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-2: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED, 0x04=LOOP_DONE) Bit 3: STATUS_LED_WARNING Bit 4: STATUS_LED_ERROR Bits 5-7: Unused - reserved for future expansion.

volatile bool	pending_enable_loop_ {false}
	ISR-safe flag for enable_loop_soon_any_context.

Protected Attributes inherited from esphome::sensor::Sensor
std::unique_ptr< CallbackManager< void(float)> >	raw_callback_
	Storage for raw state callbacks (lazy allocated).

CallbackManager< void(float)>	callback_
	Storage for filtered state callbacks.

Filter *	filter_list_ {nullptr}
	Store all active filters.

int8_t	accuracy_decimals_ {-1}
	Accuracy in decimals (-1 = not set)

StateClass	state_class_ {STATE_CLASS_NONE}
	State class (STATE_CLASS_NONE = not set)

struct esphome::sensor::Sensor::SensorFlags	sensor_flags_

Protected Attributes inherited from esphome::EntityBase
StringRef	name_

const char *	object_id_c_str_ {nullptr}

const char *	icon_c_str_ {nullptr}

uint32_t	object_id_hash_ {}

Device *	device_ {}

struct esphome::EntityBase::EntityFlags	flags_

Protected Attributes inherited from esphome::EntityBase_DeviceClass
const char *	device_class_ {nullptr}
	Device class override.

Protected Attributes inherited from esphome::EntityBase_UnitOfMeasurement
const char *	unit_of_measurement_ {nullptr}
	Unit of measurement override.

Protected Attributes inherited from esphome::spi::SPIClient
SPIBitOrder	bit_order_ {BIT_ORDER_MSB_FIRST}

SPIMode	mode_ {MODE0}

uint32_t	data_rate_ {1000000}

SPIComponent *	parent_ {nullptr}

GPIOPin *	cs_ {nullptr}

bool	release_device_ {false}

bool	write_only_ {false}

SPIDelegate *	delegate_ {SPIDelegate::NULL_DELEGATE}

Detailed Description

Definition at line 9 of file ens160_spi.h.

The documentation for this class was generated from the following files:

esphome/components/ens160_spi/ens160_spi.h
esphome/components/ens160_spi/ens160_spi.cpp

Additional Inherited Members

Detailed Description