ESPHome 2025.6.3
|
#include <sds011.h>
Public Member Functions | |
SDS011Component ()=default | |
void | set_rx_mode_only (bool rx_mode_only) |
Manually set the rx-only mode. Defaults to false. | |
void | set_pm_2_5_sensor (sensor::Sensor *pm_2_5_sensor) |
void | set_pm_10_0_sensor (sensor::Sensor *pm_10_0_sensor) |
void | setup () override |
void | dump_config () override |
void | loop () override |
float | get_setup_priority () const override |
void | set_update_interval (uint32_t val) |
void | set_update_interval_min (uint8_t update_interval_min) |
void | set_working_state (bool working_state) |
![]() | |
float | get_actual_setup_priority () const |
void | set_setup_priority (float priority) |
virtual float | get_loop_priority () const |
priority of loop(). | |
void | call () |
virtual void | on_shutdown () |
virtual void | on_safe_shutdown () |
virtual bool | teardown () |
Called during teardown to allow component to gracefully finish operations. | |
virtual void | on_powerdown () |
Called after teardown is complete to power down hardware. | |
uint8_t | get_component_state () const |
void | reset_to_construction_state () |
Reset this component back to the construction state to allow setup to run again. | |
bool | is_in_loop_state () const |
Check if this component has completed setup and is in the loop state. | |
virtual void | mark_failed () |
Mark this component as failed. | |
void | mark_failed (const char *message) |
bool | is_failed () const |
bool | is_ready () const |
virtual bool | can_proceed () |
bool | status_has_warning () const |
bool | status_has_error () const |
void | status_set_warning (const char *message="unspecified") |
void | status_set_error (const char *message="unspecified") |
void | status_clear_warning () |
void | status_clear_error () |
void | status_momentary_warning (const std::string &name, uint32_t length=5000) |
void | status_momentary_error (const std::string &name, uint32_t length=5000) |
bool | has_overridden_loop () const |
void | set_component_source (const char *source) |
Set where this component was loaded from for some debug messages. | |
const char * | get_component_source () const |
Get the integration where this component was declared as a string. | |
bool | should_warn_of_blocking (uint32_t blocking_time) |
![]() | |
UARTDevice ()=default | |
UARTDevice (UARTComponent *parent) | |
void | set_uart_parent (UARTComponent *parent) |
void | write_byte (uint8_t data) |
void | write_array (const uint8_t *data, size_t len) |
void | write_array (const std::vector< uint8_t > &data) |
template<size_t N> | |
void | write_array (const std::array< uint8_t, N > &data) |
void | write_str (const char *str) |
bool | read_byte (uint8_t *data) |
bool | peek_byte (uint8_t *data) |
bool | read_array (uint8_t *data, size_t len) |
template<size_t N> | |
optional< std::array< uint8_t, N > > | read_array () |
int | available () |
void | flush () |
int | read () |
size_t | write (uint8_t data) |
int | peek () |
void | check_uart_settings (uint32_t baud_rate, uint8_t stop_bits=1, UARTParityOptions parity=UART_CONFIG_PARITY_NONE, uint8_t data_bits=8) |
Check that the configuration of the UART bus matches the provided values and otherwise print a warning. | |
Protected Member Functions | |
void | sds011_write_command_ (const uint8_t *command) |
uint8_t | sds011_checksum_ (const uint8_t *command_data, uint8_t length) const |
optional< bool > | check_byte_ () const |
void | parse_data_ () |
uint16_t | get_16_bit_uint_ (uint8_t start_index) const |
![]() | |
virtual void | call_loop () |
virtual void | call_setup () |
virtual void | call_dump_config () |
void | set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f) |
Set an interval function with a unique name. | |
void | set_interval (uint32_t interval, std::function< void()> &&f) |
bool | cancel_interval (const std::string &name) |
Cancel an interval function. | |
void | set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f) |
Set an retry function with a unique name. | |
void | set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f) |
bool | cancel_retry (const std::string &name) |
Cancel a retry function. | |
void | set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f) |
Set a timeout function with a unique name. | |
void | set_timeout (uint32_t timeout, std::function< void()> &&f) |
bool | cancel_timeout (const std::string &name) |
Cancel a timeout function. | |
void | defer (const std::string &name, std::function< void()> &&f) |
Defer a callback to the next loop() call. | |
void | defer (std::function< void()> &&f) |
Defer a callback to the next loop() call. | |
bool | cancel_defer (const std::string &name) |
Cancel a defer callback using the specified name, name must not be empty. | |
Protected Attributes | |
sensor::Sensor * | pm_2_5_sensor_ {nullptr} |
sensor::Sensor * | pm_10_0_sensor_ {nullptr} |
uint8_t | data_ [10] |
uint8_t | data_index_ {0} |
uint32_t | last_transmission_ {0} |
uint8_t | update_interval_min_ |
bool | rx_mode_only_ |
![]() | |
uint8_t | component_state_ {0x00} |
State of this component - each bit has a purpose: Bits 0-1: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED) Bit 2: STATUS_LED_WARNING Bit 3: STATUS_LED_ERROR Bits 4-7: Unused - reserved for future expansion (50% of the bits are free) | |
float | setup_priority_override_ {NAN} |
const char * | component_source_ {nullptr} |
uint16_t | warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_MS} |
Warn if blocked for this many ms (max 65.5s) | |
std::string | error_message_ {} |
![]() | |
UARTComponent * | parent_ {nullptr} |
|
default |
|
protected |
Definition at line 131 of file sds011.cpp.
|
overridevirtual |
Reimplemented from esphome::Component.
Definition at line 69 of file sds011.cpp.
|
inlineprotected |
|
overridevirtual |
Reimplemented from esphome::Component.
Definition at line 111 of file sds011.cpp.
|
overridevirtual |
Reimplemented from esphome::Component.
Definition at line 80 of file sds011.cpp.
|
protected |
Definition at line 166 of file sds011.cpp.
|
protected |
Definition at line 123 of file sds011.cpp.
|
protected |
Definition at line 115 of file sds011.cpp.
|
inline |
|
inline |
void esphome::sds011::SDS011Component::set_rx_mode_only | ( | bool | rx_mode_only | ) |
Manually set the rx-only mode. Defaults to false.
Definition at line 113 of file sds011.cpp.
|
inline |
void esphome::sds011::SDS011Component::set_update_interval_min | ( | uint8_t | update_interval_min | ) |
Definition at line 185 of file sds011.cpp.
void esphome::sds011::SDS011Component::set_working_state | ( | bool | working_state | ) |
Definition at line 54 of file sds011.cpp.
|
overridevirtual |
Reimplemented from esphome::Component.
Definition at line 32 of file sds011.cpp.
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |
|
protected |