#include <seeed_mr24hpc1.h>

Inheritance diagram for esphome::seeed_mr24hpc1::MR24HPC1Component:

Public Member Functions
float	get_setup_priority () const override

void	setup () override

void	dump_config () override

void	loop () override

void	get_heartbeat_packet ()

void	get_radar_output_information_switch ()

void	get_product_mode ()

void	get_product_id ()

void	get_hardware_model ()

void	get_firmware_version ()

void	get_human_status ()

void	get_human_motion_info ()

void	get_body_motion_params ()

void	get_keep_away ()

void	get_scene_mode ()

void	get_sensitivity ()

void	get_unmanned_time ()

void	get_custom_mode ()

void	get_existence_boundary ()

void	get_motion_boundary ()

void	get_spatial_static_value ()

void	get_spatial_motion_value ()

void	get_distance_of_static_object ()

void	get_distance_of_moving_object ()

void	get_target_movement_speed ()

void	get_existence_threshold ()

void	get_motion_threshold ()

void	get_motion_trigger_time ()

void	get_motion_to_rest_time ()

void	get_custom_unman_time ()

void	set_scene_mode (uint8_t value)

void	set_underlying_open_function (bool enable)

void	set_sensitivity (uint8_t value)

void	set_restart ()

void	set_unman_time (uint8_t value)

void	set_custom_mode (uint8_t mode)

void	set_custom_end_mode ()

void	set_existence_boundary (uint8_t value)

void	set_motion_boundary (uint8_t value)

void	set_existence_threshold (uint8_t value)

void	set_motion_threshold (uint8_t value)

void	set_motion_trigger_time (uint8_t value)

void	set_motion_to_rest_time (uint16_t value)

void	set_custom_unman_time (uint16_t value)

Public Member Functions inherited from esphome::Component
float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop().

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

virtual bool	teardown ()
	Called during teardown to allow component to gracefully finish operations.

virtual void	on_powerdown ()
	Called after teardown is complete to power down hardware.

uint8_t	get_component_state () const

void	reset_to_construction_state ()
	Reset this component back to the construction state to allow setup to run again.

bool	is_in_loop_state () const
	Check if this component has completed setup and is in the loop state.

virtual void	mark_failed ()
	Mark this component as failed.

void	mark_failed (const char *message)

bool	is_failed () const

bool	is_ready () const

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages.

const char *	get_component_source () const
	Get the integration where this component was declared as a string.

bool	should_warn_of_blocking (uint32_t blocking_time)

Public Member Functions inherited from esphome::uart::UARTDevice
	UARTDevice ()=default

	UARTDevice (UARTComponent *parent)

void	set_uart_parent (UARTComponent *parent)

void	write_byte (uint8_t data)

void	write_array (const uint8_t *data, size_t len)

void	write_array (const std::vector< uint8_t > &data)

template<size_t N>
void	write_array (const std::array< uint8_t, N > &data)

void	write_str (const char *str)

bool	read_byte (uint8_t *data)

bool	peek_byte (uint8_t *data)

bool	read_array (uint8_t *data, size_t len)

template<size_t N>
optional< std::array< uint8_t, N > >	read_array ()

int	available ()

void	flush ()

int	read ()

size_t	write (uint8_t data)

int	peek ()

void	check_uart_settings (uint32_t baud_rate, uint8_t stop_bits=1, UARTParityOptions parity=UART_CONFIG_PARITY_NONE, uint8_t data_bits=8)
	Check that the configuration of the UART bus matches the provided values and otherwise print a warning.

Additional Inherited Members
Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name.

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function.

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name.

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function.

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name.

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function.

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call.

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call.

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty.

Protected Attributes inherited from esphome::Component
uint8_t	component_state_ {0x00}
	State of this component - each bit has a purpose: Bits 0-1: Component state (0x00=CONSTRUCTION, 0x01=SETUP, 0x02=LOOP, 0x03=FAILED) Bit 2: STATUS_LED_WARNING Bit 3: STATUS_LED_ERROR Bits 4-7: Unused - reserved for future expansion (50% of the bits are free)

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

uint16_t	warn_if_blocking_over_ {WARN_IF_BLOCKING_OVER_MS}
	Warn if blocked for this many ms (max 65.5s)

std::string	error_message_ {}

Protected Attributes inherited from esphome::uart::UARTDevice
UARTComponent *	parent_ {nullptr}

Detailed Description

Definition at line 96 of file seeed_mr24hpc1.h.

Member Function Documentation

◆ dump_config()

void esphome::seeed_mr24hpc1::MR24HPC1Component::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 15 of file seeed_mr24hpc1.cpp.

◆ get_body_motion_params()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_body_motion_params ( )

Definition at line 632 of file seeed_mr24hpc1.cpp.

◆ get_custom_mode()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_custom_mode ( )

Definition at line 644 of file seeed_mr24hpc1.cpp.

◆ get_custom_unman_time()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_custom_unman_time ( )

Definition at line 688 of file seeed_mr24hpc1.cpp.

◆ get_distance_of_moving_object()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_distance_of_moving_object ( )

Definition at line 664 of file seeed_mr24hpc1.cpp.

◆ get_distance_of_static_object()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_distance_of_static_object ( )

Definition at line 660 of file seeed_mr24hpc1.cpp.

◆ get_existence_boundary()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_existence_boundary ( )

Definition at line 646 of file seeed_mr24hpc1.cpp.

◆ get_existence_threshold()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_existence_threshold ( )

Definition at line 672 of file seeed_mr24hpc1.cpp.

◆ get_firmware_version()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_firmware_version ( )

Definition at line 622 of file seeed_mr24hpc1.cpp.

◆ get_hardware_model()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_hardware_model ( )

Definition at line 619 of file seeed_mr24hpc1.cpp.

◆ get_heartbeat_packet()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_heartbeat_packet ( )

Definition at line 605 of file seeed_mr24hpc1.cpp.

◆ get_human_motion_info()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_human_motion_info ( )

Definition at line 628 of file seeed_mr24hpc1.cpp.

◆ get_human_status()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_human_status ( )

Definition at line 626 of file seeed_mr24hpc1.cpp.

◆ get_keep_away()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_keep_away ( )

Definition at line 636 of file seeed_mr24hpc1.cpp.

◆ get_motion_boundary()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_motion_boundary ( )

Definition at line 650 of file seeed_mr24hpc1.cpp.

◆ get_motion_threshold()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_motion_threshold ( )

Definition at line 676 of file seeed_mr24hpc1.cpp.

◆ get_motion_to_rest_time()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_motion_to_rest_time ( )

Definition at line 684 of file seeed_mr24hpc1.cpp.

◆ get_motion_trigger_time()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_motion_trigger_time ( )

Definition at line 680 of file seeed_mr24hpc1.cpp.

◆ get_product_id()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_product_id ( )

Definition at line 616 of file seeed_mr24hpc1.cpp.

◆ get_product_mode()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_product_mode ( )

Definition at line 613 of file seeed_mr24hpc1.cpp.

◆ get_radar_output_information_switch()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_radar_output_information_switch ( )

Definition at line 608 of file seeed_mr24hpc1.cpp.

◆ get_scene_mode()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_scene_mode ( )

Definition at line 638 of file seeed_mr24hpc1.cpp.

◆ get_sensitivity()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_sensitivity ( )

Definition at line 640 of file seeed_mr24hpc1.cpp.

◆ get_setup_priority()

float esphome::seeed_mr24hpc1::MR24HPC1Component::get_setup_priority ( ) const

inlineoverridevirtual

Reimplemented from esphome::Component.

Definition at line 168 of file seeed_mr24hpc1.h.

◆ get_spatial_motion_value()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_spatial_motion_value ( )

Definition at line 656 of file seeed_mr24hpc1.cpp.

◆ get_spatial_static_value()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_spatial_static_value ( )

Definition at line 652 of file seeed_mr24hpc1.cpp.

◆ get_target_movement_speed()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_target_movement_speed ( )

Definition at line 668 of file seeed_mr24hpc1.cpp.

◆ get_unmanned_time()

void esphome::seeed_mr24hpc1::MR24HPC1Component::get_unmanned_time ( )

Definition at line 642 of file seeed_mr24hpc1.cpp.

◆ loop()

void esphome::seeed_mr24hpc1::MR24HPC1Component::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 104 of file seeed_mr24hpc1.cpp.

◆ set_custom_end_mode()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_custom_end_mode ( )

Definition at line 794 of file seeed_mr24hpc1.cpp.

◆ set_custom_mode()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_custom_mode ( uint8_t mode )

Definition at line 770 of file seeed_mr24hpc1.cpp.

◆ set_custom_unman_time()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_custom_unman_time ( uint16_t value )

Definition at line 875 of file seeed_mr24hpc1.cpp.

◆ set_existence_boundary()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_existence_boundary ( uint8_t value )

Definition at line 813 of file seeed_mr24hpc1.cpp.

◆ set_existence_threshold()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_existence_threshold ( uint8_t value )

Definition at line 833 of file seeed_mr24hpc1.cpp.

◆ set_motion_boundary()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_motion_boundary ( uint8_t value )

Definition at line 823 of file seeed_mr24hpc1.cpp.

◆ set_motion_threshold()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_motion_threshold ( uint8_t value )

Definition at line 843 of file seeed_mr24hpc1.cpp.

◆ set_motion_to_rest_time()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_motion_to_rest_time ( uint16_t value )

Definition at line 863 of file seeed_mr24hpc1.cpp.

◆ set_motion_trigger_time()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_motion_trigger_time ( uint8_t value )

Definition at line 853 of file seeed_mr24hpc1.cpp.

◆ set_restart()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_restart ( )

Definition at line 757 of file seeed_mr24hpc1.cpp.

◆ set_scene_mode()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_scene_mode ( uint8_t value )

Definition at line 723 of file seeed_mr24hpc1.cpp.

◆ set_sensitivity()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_sensitivity ( uint8_t value )

Definition at line 746 of file seeed_mr24hpc1.cpp.

◆ set_underlying_open_function()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_underlying_open_function ( bool enable )

Definition at line 694 of file seeed_mr24hpc1.cpp.

◆ set_unman_time()

void esphome::seeed_mr24hpc1::MR24HPC1Component::set_unman_time ( uint8_t value )

Definition at line 762 of file seeed_mr24hpc1.cpp.

◆ setup()

void esphome::seeed_mr24hpc1::MR24HPC1Component::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 64 of file seeed_mr24hpc1.cpp.

The documentation for this class was generated from the following files:

esphome/components/seeed_mr24hpc1/seeed_mr24hpc1.h
esphome/components/seeed_mr24hpc1/seeed_mr24hpc1.cpp

Public Member Functions

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ dump_config()

◆ get_body_motion_params()

◆ get_custom_mode()

◆ get_custom_unman_time()

◆ get_distance_of_moving_object()

◆ get_distance_of_static_object()

◆ get_existence_boundary()

◆ get_existence_threshold()

◆ get_firmware_version()

◆ get_hardware_model()

◆ get_heartbeat_packet()

◆ get_human_motion_info()

◆ get_human_status()

◆ get_keep_away()

◆ get_motion_boundary()

◆ get_motion_threshold()

◆ get_motion_to_rest_time()

◆ get_motion_trigger_time()

◆ get_product_id()

◆ get_product_mode()

◆ get_radar_output_information_switch()

◆ get_scene_mode()

◆ get_sensitivity()

◆ get_setup_priority()

◆ get_spatial_motion_value()

◆ get_spatial_static_value()

◆ get_target_movement_speed()

◆ get_unmanned_time()

◆ loop()

◆ set_custom_end_mode()

◆ set_custom_mode()

◆ set_custom_unman_time()

◆ set_existence_boundary()

◆ set_existence_threshold()

◆ set_motion_boundary()

◆ set_motion_threshold()

◆ set_motion_to_rest_time()

◆ set_motion_trigger_time()

◆ set_restart()

◆ set_scene_mode()

◆ set_sensitivity()

◆ set_underlying_open_function()

◆ set_unman_time()

◆ setup()